We need to maintain the screw before and after use, so as to extend the life of the screw. What maintenance should injection molding machine screw manufacturers do when they are in use......　

The conical screw of the injection molding machine screw manufacturer has the following characteristics: the quality is stable and the output is high, there are more suitable places for use, the use time is still very long, and......　

Special tools should be used when disassembling the Zhoushan screw of the injection molding machine screw manufacturer, and no heavy hammer is allowed. The specific disassembly steps are as follows......　

The repair and strengthening of the screw of the injection molding machine screw manufacturer are as follows:1. Surface cleaning——The plastic attachments on the surface of the screw must be......　

The plasticizing device usually rotates as a whole. It needs to be positioned during disassembly and installation. If it deviates from the original setting, it must be restored to its original position......　

What are the functions of the extrusion screw of the injection molding machine screw manufacturer? We currently divide the extrusion screws into single extrusion screws, double extrusion screws and new extrusion screws......　

How should the extruder screw of an injection molding machine screw manufacturer be heated? We generally use resistance heating, and thermocouples can also control the temperature in sections and perform detection......　

How do injection molding machine screw manufacturers solve the problem of color replacement of injection molding machines and the problem of coking of the screw? Let's talk about the method used below......　

When using the extruder, we may encounter the situation that the extruder screw no longer rotates. It may be the cause of the jam. At this time, we need to consider that it may be because the......　

Injection molding machine screw manufacturers know from the melting theory and operation practice that the position of the melting start point A and melting point B of the plastic on the extruder screw and the screw parameters......　

Injection molding machine screw manufacturers put forward the following suggestions for the repair of extrusion screws:1. According to the inner diameter of the barrel, find the screw that can replace......　

When we install the Zhoushan screw, we should pay attention to some things. Now we will introduce the installation of Zhoushan screw in detail......　

Injection molding machines are the main machinery when processing plastics, and plastic auxiliary machines will become an important technical equipment for the national economy and all walks of life......　

The structure of Zhoushan screw can generally be divided into three sections. The front section belongs to the feeding section. The material in the hopper is added to this section to compact it......　

When the Zhoushan screw is rotating, the raw material of the plastic will move forward. The raw material will be heated by the urgent outside heating and then the raw material will be passed in......